66KV Galvanized Electrical Transmission Line Steel Tubular Pole
1) Steel materials conform to ASTM A36 with
2) Welding: Welding complies with CSA and AWS, AWS D1.1 standard.
3) Finish: Hot-dip galvanized in accordance with ASTM A123. Min
Zinc Coating 86 microns.
4) Pole Height: Transmission pole ≥ 15M
5) Pole shape: Conical, Round, Polygonal---Octagonal, Dodecagonal,
6) Type: Straight Pole ,Tensile Pole ,Turn Pole (Double-loop corner
pole, Single or double loops/circuit pole,
single or double tensile/terminal/straight pole, etc)
7) Surface hot-dip-galvanized and sometimes with Bituminous
Painting as customer's request.
8) Resistant: against earthquake of 8.8 grade. Wind speed as
9) Quality Standard: ISO9001:2000,AAA credit rating
10) Easy install and maintenance
11) Packages: Normally covered by sack or as customer’s
The 66KV Galvanized Electrical Transmission Line Steel Tubular Pole in
Hot dip Galvanization was design as customer's request. For Distribution and Transmission
Line use. And with Base Plate use Anchor Bolts to Install. Sections
with 2 and use flange to connect each segments. The hot dip
galvanized in accordance with ASTM 123 and the zinc coating at
least 86 microns.
But to design the practical poles for customers use, normally we
need customer to provide us some parameter, like as following :
- Pole top design load
- Where is the position of the load , the distance from the top
- The wind Speed
- How will the wire distribute
- Pole type with Burial Type or Base Plate type
- The connections mode , use slip joint or flange
- and others we can further more discuss when we need.
2. Base Plate
3. Pole Top Cap
4. Butt Strip Plate
7. Grounding Nut & Bolts
8. Anchor Bolts
9. Climbing Rungs
10. Identification Plate
11. Bituminous Painting if needed
12. Hot dip galvanized.
1. All of our material are purchased from famous mill factory to
assure the quality.
2. A mill certificate issued by the mill factory with stamp and
signature must be provided before
unload the material in our factory;
3. Before put into production, all the material must pass the
chemical and physical analysis to
make sure that they have met the requested strength and component.
- Raw material test
- Welding (longitudinal )
- Dimension verify
- Flange welding
- Hole drilling
- Galvanization or powder coating or Bituminous painting
Best Service: -- Jiangsu Bosheng Steel Poles Co.,Ltd, which always
our clients with great quality products and superior Customer
Quick Lead Time.--We inform the client the exact delivery time when
they place the order and work Hard to
ensure that all of your deadlines are meet.
|Unbeatable Prices-- Raw Material Cost + Produce Cost 1200 RMB/Ton|
|Unbeatable Quality -- We always supply good quality also leading
products to all of our customers.|
|Brand Awareness -- We achieve a good reputation among our clients
and deal the long term business.|
|Special Offers. -- We quote first and then you compared , finally
choose us !|
|Special support.-- we have a policy term to support our customers
for products also payment.|
Through the efforts of the company staff, the support and
cooperation from all over the world. The company's products have
been exported to Philippines, Malaysia, Australia, America, Africa,
Latin America, Panama, Suriname, Costa Rica, Colombia, Jordan,
Nigeria, etc. We have good export experience and with 1 container
export to World in average every day.
1. What is the MOQ order for your Pole ?
For the distribution steel poles, MOQ is one container. For the
transmission pole is 1 pcs.
2. Can i use LCL container Loading ?
Sure. We can load on LCL.
3. Can you supply sample poles ?
Of course we can delivery the sample poles for customer to test.
4. Can i get a lower price if i make the large order ?
Of course ! Cheaper prices with large order.
5. What is the payment term ?
30% as deposit in advance and 70% before delivery. Or LC at sight .
Or D/P. Or we can discuss with others
After - Sales Service
Our staff supply excellent after service, track and get the product
information after our client got the products. We asked our client
to fill a “Survey form for Satisfaction degree from Client”. We
will solve the problems from client in 24 hours ,and we improve the
quality and working method according to client’s good suggestions.